Sindoh M403 - Manual (Page 120)

Scanner, Printer and Fax
3-
38
- Press the 【 】 button to enter the pause key.
Speed Dial
① 【SPEED DIAL】 button
- When Ready is displayed on the LCD, press the 【SPEED DIAL】 button.
- Use the number pad to enter the speed dial number or press the 【◀】 or 【▶】 button to select
the registered speed dial number, and then press the 【OK】 button. You may not need to
press the 【OK】 button. To enter the speed dial number, enter two digits (01~99).
- Press the 【 】 button to send the fax.
② 【FAX】 button to the left of the LCD
- Press the 【SPEED DIAL】 button to enter the speed dial number registered to the device,
and then press the 【OK】 button. You may not need to press the 【OK】 button.
- Press the 【 】 button to send the fax.
Address book
- Press the 【FAX】 button to the left of the LCD. And then press the 【#】 button twice to go to
the address book.
- Press the 【◀】 or 【▶】 button to select the desired number from the address book, and then
press the 【OK】 button. You may not need to press the 【OK】 button.
- Press the button to send the fax.
Only in [Menu], the telephone number can be added, deleted or modified.
Group dial
- Press the 【FAX】 button to the left of the LCD. And then press the 【#】 button once to go to
the group dial.
- Press the 【◀】 or 【▶】 button to select the desired number from the address book, and then
press the 【OK】 button. You may not need to press the 【OK】 button.
- Press the 【 】 button to send the fax.
Only in [Menu], the telephone number can be added, deleted or modified.
[Pause Key]
- When the internal line is switched to the external line, Pause Key gives time to the
switchboard.
When “Pause” is entered with the 【 】, two-second pause is given when dialing the receiver.
- Press the 【 】 button to enter “Pause”. (* appear on the LCD.)