CTL Lx-Lite VoiceSupport - Manual (Page 76)

Mailboxes
Subscriber Mailbox
3-42 VoiceSupport LX System Guide
Chapter 3 Customizing Voice Mail
Setting Up Message Notification
4a) Click the Message Notification link to display the Message Notification dialog
box:
4b) Enter the appropriate data in the following fields:
Phone Number - Enter up to three different telephone numbers that the
Voice Mail will dial when the Subscriber Mailbox receives messages. Include
any of the following special codes:
F - Flash
W - Wait for dial tone
S - Wait for sound
P - Pause
M - Monitored pause
A - Analyzed pause
Call Type - Select the Call Type (Internal, Local, or Long Dis) from the
drop-down menu.
Mode - This option allows you to assign the type of notification that will be
used for the Subscriber Mailbox. The following choices are available:
Normal - an extension number of a telephone
R. Pager - a radio pager number
D. Pager - a digital pager number
Security Code Required - If this option is enabled (Yes), a user will be
prompted to enter a Mailbox Security Code after accepting a notification call
at a non-pager number in order to gain access to the messages in the
mailbox.
4c) When you are done, click the Message Notification button to apply the changes.
Note - If Message Notification is enabled, you must also:
Specify any Access Digits that are required to connect the Voice Mail to an
outside trunk. See Tenant Options, Access Digits on page 3-84
Set up the notification schedule as outlined in the VoiceSupport User’s
Guide.