CTL Lx-Lite VoiceSupport - Manual (Page 26)

Serial Communications Ports
2-12 VoiceSupport LX System Guide
Chapter 2 Installation and Setup
Serial Communications Ports
You can use the Comm Port Options to adjust certain aspects of the protocol for
data transmission over the two serial ports, COM1 and COM2. This is needed for
integration with Hotel Property Management systems and with PBX/SMDI
integration.
1) Select Comm Port Options from the Tools section of the main menu.
2) Select the Comm Port that you want to configure.
3) You can change the current setting for any of the following parameters:
■ Baud Rate - This value specifies the speed in terms of the number of bits
per second at which the data is transmitted over the phone line.
300
1200
2400
4800
9600 (default)
19200