Rockwell Automation FactoryTalk Historian Classic User Guide User Manual

Page 152

Chapter 7 Creating RSBizWare Custom Analysis Tools

3. Include Register.h before the class definition in the

NegativeCalc.h header file (by adding an #include

“Register.h” statement to the NegativeCalc.h header file).

Before compiling the project, you need to alter the project settings as
follows:

1. Select Project > Settings.
2. On the dialog, select Win32 Release MinDependency from

the Settings For list at the top of the dialog box.

3. Select the C/C++ tab and remove the macro named

_ATL_MIN_CRT at the end of the Preprocessor definitions

box. (Note that this macro was removed from the example
project.)

4. Click OK to save your changes.
5. You are now ready to compile the project. You have several

options when compiling a COM DLL in Visual C++.

• It is recommended that you compile the project in debug

mode while developing the custom analysis tool. This will
allow you to step into the

Calculate()

function when it is

called from the Configuration Console. You will see how this
is done in "Debugging Custom Analysis Tools in Visual C++

(page 153)".

152

Rockwell Automation Publication HIST-UM001K-EN-E-June 2014