Using the configuration console – Rockwell Automation FactoryTalk Historian Classic User Guide User Manual

Page 15

Getting Started Chapter 2

would use the following address:

Please contact your RSBizWare administrator for the specific
Information Services Manager Web address to which you should
connect.

The first time you try to use the Quick Web, you need to download
several ActiveX controls from the server computer. The download
will begin automatically.

After you have downloaded the ActiveX controls from the
Information Services Manager, you may be prompted to log on. If
prompted, type the user name and password for the account that
your RSBizWare administrator has authorized for you, and then
click OK. A connection to the RSBizWare server is established.

If you wish to configure your plant model, manage the collection of
control system data, and/or edit RSBizWare reports, you should
connect to the Information Services Manager via the Configuration
Console. Your RSBizWare administrator must assign a FactoryTalk
Metrics Author license and the appropriate privileges to you before
you will be able to perform these functions.

You must have the Client software installed on your computer
before you can run the Configuration Console. To install the

Configuration Console from the RSBizWare CD, select the
“Minimal” install option.

1. To start the Configuration Console, select Programs >

Rockwell Software > RSBizWare > Configuration Console.

2. If you have not already logged into RSBizWare, the Login

dialog will display. Enter the user name and password for the
account your RSBizWare administrator has authorized for
you. Enter the name of the server computer where the
Information Services Manager is running in the Server box.
Click Login.

Using the Configuration
Console

Rockwell Automation Publication HIST-UM001K-EN-E-June 2014