Rockwell Automation 7000 PowerFlex Medium Voltage (B Frame) Commissioning - ForGe (PanelView 550) - Manual (Page 46)

42 Rockwell Automation Publication 7000-IN006B-EN-P - May 2013
Chapter 4 Commissioning Preparations
– 9-Pin Null Modem3
– 9-Pin Serial3
– Remote I/O (SCANport DeviceNet…) 1
– PLC Communications Cable 2
1Only required when Remote I/O has been provided with the drive.
2 Only required when PLC has been provided with the drive
3 Refer to Publication 7000-UM151_-EN-P, Chapter 5 – Component Definition
and Maintenance.
Additional Required
Resources Prior to scheduling your drive commission, ensure you have the following:
• Functional specifications for the drive to be commissioned (generally
available from the online MV Literature Library).
• Any commissioning notes for this customer/installation, available from the
Rockwell Automation Application Specialist or Project Manager.
• Self-powered gate driver board test power cable wire harness (Part no.
80018-298-51) supplied with SCR rectifier drives only.
• Rockwell Automation electrical and mechanical diagrams for each drive
(also available through ShopView/SAP).
• PLC program (if supplied with a PLC; materials available from teh MV
website using the order number as a reference).
• Commissioning data sheets.
• All required manuals (see below for list).
If any of the above information is not available prior to the time of
commissioning, please contact the Rockwell Automation Project Manager or the
factory.
Technical Publications and Manuals
Each drive ships with a service binder containing all technical publications
required to install, use, and troubleshoot the drive line-up. This section describes
how to determine what technical publications are required and how to obtain
them in the event that the service binder is not available when pre-
commissioning, or when you require additional information:
• Commissioning Guide lines for Rockwell Automation MV PF7000 Frame
drives (available internally at http://rain.ra.rockwell.com/mvb).
• The PowerFlex 7000 “B” Frame Installation Guide: This is a Rockwell
Automation-internal document for commissioning engineers conducting
commissioning procedures. Customers can request copies of the manual
from their local Rockwell Automation Office.