beautypg.com

Setting date, Selecting meters, Setting date selecting meters – Rockwell Automation 7000 PowerFlex Medium Voltage (B Frame) Commissioning - ForGe (PanelView 550) User Manual

Page 36

background image

32

Rockwell Automation Publication 7000-IN006B-EN-P - May 2013

Chapter 3 Initial Operator Interface Configuration

To change the minutes press [F5] again and repeat the procedure (repeat again to
change the seconds).

To abort the change, press [Backspace]. Press [Enter] to save the changes.

Setting Date

Like the clock, the calendar affects the date stamp on drive information appearing
on the alarm summary screen.

Figure 22 - Setting the calendar

The calendar uses the MM/DD/YY format.

To change the month, press [F4]. Press

or

to increment the calendar by 1

month. Press

or

to increment the calendar by 10 months.

To change the day press [F4] again and repeat the procedure (repeat again to
change the year).

To abort the change, press [Backspace]. Press [Enter] to save the changes.

You can not set the day of the week. The interface determines the day of the week
based on your date selection.

Selecting Meters

The utility screen (

Figure 18

) shows tags assigned to four meters on the top-level

menu. You can change these meters by pressing [F8] to configure meter selection,
as shown below.