Rockwell Automation 7000 PowerFlex Medium Voltage (B Frame) Commissioning - ForGe (PanelView 550) - Manual (Page 33)

Rockwell Automation Publication 7000-IN006B-EN-P - May 2013 29
Initial Operator Interface Configuration Chapter 3
Figure 16 - Typical Help screen
Exit the Help and return to the original screen at any time by pressing [F10].
Related Topics
The Help system provides additional information relating to the current topic as
links highlighted above the softkeys. Select an additional topic via the
◄
or
►
keys. Figure 16 shows the additional topic of
“
SOFTKEYS
”
. To view this
information, press [Enter].
The help for the additional topic appears as shown in Figure 17 . Related help
topics may also have additional related topics.
Figure 17 - Help—Related Topics screen
Pressing [F1] from a help screen provides instructions for using the help system.
To return to the previous help screen, press [Backspace]. To exit the Help
completely and return to the screen from which you originally requested help,
press [F10]. Press [Backspace] to return to the previous help topic.
Using the Interface
Configuration Utility Use the Utility mode to configure the operator interface, including:
• setting the clock and calendar
• changing the delay for the display backlight shutoff
• changing the contrast of the display
• defining the meters that will be displayed on the Top Level Menu