Rockwell Automation 47C626 AutoMax Programming Executive V4.2 - Manual (Page 84)

5Ć50
base memory address and port address match the addresses
entered in the Communication setup.
If you want to set up communication to an internal PC3000 and there
is more than one PC3000 installed in the personal computer, you
must select the module you want to communicate with. The Card Id
list box lists all PC3000 modules installed in the personal computer.
5.5.4 Modifying the Print Configuration
Select Print from the Setup menu to make changes to the printer
configuration. The Print Setup dialog box will be displayed. You can
make changes to the following fields. If no changes are made, the
default settings will be used. Note that duplex printing (selected on
the Printers Configuration screen using the Windows Control Panel)
is supported.
3ĆHole Punched Paper Ć This option is useful only when printing in
landscape mode. Check this box if you want to leave an extra four
lines (1/2 inch) at the top of the page for 3Ćhole punched paper.
These four lines will be included in the number of lines per page, so
there will be four fewer lines of print on each page. The default is
unchecked (not selected).
Lines Per Page Ć Select Full Page or Lines Per Page.
If you select Full Page, AutoMax will automatically print the maximum
number of lines that can be printed per page based on the
information entered on the Printers configuration screen in the
Windows Control Panel. This number will be displayed next to the
Full Page option.
If you select Lines Per Page, enter a number between 20 and one
less than the number displayed for Full Page.
Font - Select AutoMax Selected or User Selected
If you select AutoMax Selected, the Programming Executive will
automatically select a nonĆproportional font for printouts.
If you select User Selected, you can select the font you want to use
for printouts. To select a font:
Step 1.
Choose the Choose Font button.
Step 2. In the Font dialog box, choose a font, font style, and size
from the list of fonts presented. Only those
nonĆproportional fonts that are installed on the PC and are
supported in the default printer are supported.
Step 3. Choose OK.
5.6 Online Menu
The Online menu on the System Configurator screen is used to
access the Online Task Manager or access the Ladder Editor to
monitor a PC program.
5.6.1 Accessing Online Functions
Select Online Task Manager from the Online menu to access the
online functions. These functions are described in sections 10
through 18 as follows: