Rockwell Automation 47C626 AutoMax Programming Executive V4.2 - Manual (Page 138)

8Ć16
8.17.4.2 Generating the Drive Parameter Files
The Generate Configuration command can be used to create the
drive parameter object files (.POB) for all UDCs in the rack. To create
the drive parameter files, choose the Generate Drive Parameter Files
option. A file named PARAMXX.POB will be created, where XX is the
slot number of the UDC module. The drive parameters must be
loaded onto the UDC(s) in the rack before or at the same time UDC
application tasks are loaded. See 14.3 for information about loading
the drive parameter files.
You can print the drive parameters for a UDC module by using the
Print command from the Rack menu in the System Configurator.
8.17.5 Jumping to Another Rack
Select Jump from the Commands menu in the Task Manager to jump
to another rack without leaving the Task Manager. When you select
Jump, the System, Section, Rack dialog box will be displayed. Select
the destination rack and press OK to jump to that rack.
8.18 Setup Menu
Purge Options Ć This command allows you to specify the extensions
for the backup files you want to delete when the Purge command is
selected. See 8.17.3 for more information.
Utilities Iconized Ć This command allows you to specify whether
utilities such as the compiler and crossĆreference are spawned as
windows or as icons.
8.19 Online Menu
The Online menu on the Task Manager screen is used to access the
Online Task Manager or access the PC Editor to monitor a PC
program.
8.19.1 Accessing Online Functions
Select Online Task Manager to access the online functions. It is the
same as the Online Task Manager command in the System
Configurator. See section 5.6.1 for more information.
8.19.2 Monitoring a PC Program Online
Select Monitor PC Program from the Online menu to call the AutoMax
Ladder Editor. Refer to J2Ć3093 for instruction on using the AutoMax
Ladder Editor to monitor a PC task online.