Rockwell Automation 47C626 AutoMax Programming Executive V4.2 - Manual (Page 54)

5Ć20
5.2.7 Printing Section Files
The Print Section command enables you to print out files relevant to
one or more sections of a system. After selecting one or more
sections from the Section list, select Print from the Section menu. A
dialog box with the various print options will be displayed (see the
figure below).
Figure 5.13 Ć Print Section Dialog Box
Selecting Section Print will print out the following for each of the
selected sections:
D Section title page (section name, description, engineer, and a list
of racks in the section).
D Section documentation file
D Rack title page (rack name, description, engineer, location, and
a list of the tasks in the rack).
D Rack documentation file
D Rack cross reference file
D Rack parameter file (only for racks containing UDC modules)
D Task title page (task name, description, engineer, slot,
priority, critical, reconstructible, utility).
D Task documentation file
D Task source code
D Task cross reference file
If you deĆselect (uncheck) Section Print, the Section Documentation
option will be enabled. Select Section Documentation to print out the
section documentation file.
Select Use Existing Cross Reference Files if you know that the
cross reference files are current. Selecting this option will save time
since new files will not be generated before printing. If cross
reference files do not already exist, they will be generated and
printed. Note that cross reference files generated by the print routine
will be deleted after printing.