Rockwell Automation 47C626 AutoMax Programming Executive V4.2 - Manual (Page 132)

8Ć10
The source code and the documentation files for the task
are always transferred. Select any of the following files you
want to transfer with the task:
Object files Ć compiled application task.
CrossĆreference files Ć cross reference file for the rack.
Step 3. Select Cancel to return to the Task Manager without
transferring a task, or OK to begin the task transfer.
Figure 8.4 Ć Transferring Task Files Using Transfer
Transferring Task Files Using TransferĆPlus
Use the following procedure to transfer task files using TransferĆPlus.
If you are transferring to diskettes, you will be prompted for additional
diskettes, if needed. Diskettes can be formatted or, to save time, you
can use preĆformatted diskettes. Diskettes do not have to be blank.
Figure 8.5 illustrates the TransferĆPlus dialog box.
Step 1.
Select the task(s) to be transferred from the tasks list.
Step 2. Select TransferĆPlus from the System menu. The
TransferĆPlus dialog box is displayed, with the selected
tasks listed.
Step 3. Enter information for the following fields. Some fields
contain default entries. If you do not change these fields,
the defaults will be used.
Source/Destination Ć If you are transferring to or from
floppy diskettes, you must also select floppy drive A or B.
If you want to transfer to or from another AutoMax library,
select More Options and then enter the drive and AutoMax
library name.