Rockwell Automation 47C626 AutoMax Programming Executive V4.2 - Manual (Page 63)

5Ć29
VARIABLE NAME Ć the variable name including type and array
dimensions
TYPE Ć the variable type:
I/O Ć mapped to a module in the master rack other than an
Interface or Network module or to setĆup registers on an
Interface or Network module
Rem I/O Ć mapped to a Remote I/O module or Rail
AutoMate Ć mapped to an AutoMate Interface module
AB Link Ć mapped to an AĆB Interface module
Modbus Ć mapped to a Modbus Interface module
Network Ć mapped to a Network module without using a
netĆwide name
NetĆwide Ć mapped to a Network module using a netĆwide name
Memory Ć mapped to common memory module (volatile)
nvMemory Ć mapped to common memory (nonĆvolatile)
Reserved Ć variable has the same name as a reserved name
(e.g., BATTERYSTATUS@)
Unknown Ć used in a task but not mapped to an I/O or common
memory location
HW_Event Ć hardware event
SW_Event Ć software event
S Ć the master slot number
D Ć the remote I/O drop number (for remote I/O); the drop area
number (for Network); B0, B1, N0, N1 (for AĆB Interface); [blank]
(otherwise)
RS Ć the remote slot number (for remote Shark and Multibus I/O);
Remote Head port (for AutoMate I/O); [blank] (otherwise)
REG Ć Local Head port (for AutoMate I/O); the register in octal (for
AutoMate Interface); the register in decimal (otherwise)
B Ć the bit number for booleans, [blank] otherwise
DESCRIPTION Ć the variable description (from networkĆwide
database for linked network variables; description in the variable
database if present; otherwise, description from the first task that
has one; otherwise blank)
TASK CROSS REFERENCE Ć names of the task(s) which use the
variable; no extension; '*' if variable is modified