Rockwell Automation 47C626 AutoMax Programming Executive V4.2 - Manual (Page 56)

5Ć22
Step 5. Select Help for information relative to the transfer
procedure, Cancel to return to the System Configurator
without transferring a section, or OK to begin the section
transfer.
Figure 5.14 Ć Transfer Section
5.2.9 Selecting All Sections
The Select All command selects all the sections listed for the selected
system. Select All can be used when you want to transfer, print
documentation files, or remove all of the sections for a selected
system. To select one section after selecting all, simply click on the
selected section.
5.2.10 Using Version Control Library
If your AutoMax system is using the Version Control Library facility,
the command Version Control Library" will appear on the Section
menu. Refer to Appendix K for how to use the VCL commands.
5.3 Rack Menu
The Rack menu is used to add, modify, edit, print the files for the
rack, transfer, and remove racks in a section. Each rack corresponds
directly to an AutoMax rack which is installed for the application.
The Rack menu provides access to the Rack Configurator, from
which you can access the Variable Configurator. The Rack menu also
provides access to Task Manager, from which you create/edit
application tasks for the rack. The Rack Configurator, Variable
Configurator, and Task Manager are described in sections 6, 7 and 8.