Rockwell Automation 47C626 AutoMax Programming Executive V4.2 - Manual (Page 43)

5Ć9
Direction arrows Ć Transfer the system To (left arrow) or
From (right arrow) the current AutoMax Executive V4.1
library. Select the appropriate option button.
Drive Ć Enter the source drive or the destination drive. If A
or B is entered, AutoMax Executive V4.x assumes the drive
is a floppy drive; otherwise, AutoMax assumes a hard
drive.(R)
Library Ć Enter the library directory to copy the system(s)
from or to. (R)
Format Floppies Ć Select if you want to format destination
diskettes.
High Capacity Ć Select if you want to format and/or write to
high density diskettes. The appropriate diskette capacity
will be displayed.
System(s) Ć The AutoMax Executive will list the system(s)
selected when the Transfer command was called. If you
are transferring out of the current library, make certain that
this field lists all of the systems you have selected. If you
are transferring systems in, enter the system names
separated by commas or spaces. (R)
SystemĆwide information only Ć If this box is selected, only
the system, section, rack, and network databases, and the
system documentation file will be transferred.
Step 4. Select which of the following groups of files you want to
transfer with the system. These files are not necessary
since they can be regenerated from the source files.
Object files Ć the compiled application tasks, parameter
object files, and rack configuration object file(s).
CrossĆreference files
Transfer Tokens (See Appendix N for more information.)
Step 5. Select Help for information about the transfer procedure,
Cancel to return to the System Configurator without
transferring a system, or OK to begin the system transfer.