Rockwell Automation 9330-CC ControlGuardian User's Guide - Manual (Page 35)

Preface
ControlGuardian User’s Guide
3-4
Configuring Program Operational Parameters
To configure program operational parameters, follow the instructions on the left:
Configure Program
Parameters
F8
F3
Program Operational
Parameters
Use function keys
to configure parameters.
See Table 3.B.
Main Menu
6 2 0
Table 3.B
Available Function Keys for Program Operational Parameters
If you want to: Press this key:
Store temporary files to increase software operational speed.
You use this only if RAM drive is available.
F1
Directory to hold temporary files
Determine the number of program file backups to save. The
backups are saved under the currently displayed project name
with a three-digit file extension. The higher the extension
number, the more recent the back-up version of the program
file. For more information on back-up files, see chapter 7.
F2
Number of program backups to
save
Determine which documentation database files to use and
which file format to use. Toggle between 6200 series and A. I.
series.
If set to 6200 Series, use 6200 documentation and the .DA1
file format. The Allen-Bradley .DA1 format consists of a .PR1
and .DA1 file.
If set to A. I. Series, use A. I. series documentation and the
.LAD file format.
F3
PLC-2 Program & Database Files
(Continued)