Preface – Rockwell Automation 9330-CC ControlGuardian User's Guide User Manual

Page 142

Preface

ControlGuardian User’s Guide

10-8

Table 10.C

Ladder Parms 1 Function Key Descriptions

If you want to:

Press this key:

Determine which printer codes will be sent at the start of each line on the

ladder report. Toggle through Normal, Compressed, Enhanced,

Normal/Compressed, Raw Normal, and Raw Compressed. The default

is normal.

Ladder Print Mode

Choose the placement of the rung descriptions. Toggle between Fit in

Rung or No Compress. Fit in Rung causes the rung description to remain

within the power rails. No Compress prints the rung descriptions the

width of the page regardless of the power rail boundaries.

Rung Desc. Print Mode

Place a framing character around all rung descriptions printed.

Box Rung Description

Keep all components of an instruction on the same page. Toggle

between yes and no. The default is no.

Chk Page on Vertical Split

Select the mode to print timer and counter instructions. Toggle between

Normal Block Mode and Small Mode. The default is normal mode.

Instruction Print Mode

Choose the number of lines of text to be printed above instructions on the

ladder diagram. Toggle through 0, 1, 2, 3, 4 and 5. The default is 0.

# of Des Lines to Print

Toggle through Normal, Replace, or None. Normal prints both address

and symbol. Replace omits the address when the symbol name is

present. None prints address only.

Symbolic Mode

Display the card type below instructions that reference defined modules.

Toggle between yes and no. The default is yes.

Show I/O Cards

appears on the screen, but is not supported

Although the

key appears on this configuration screen, it has no affect on the

actual ladder report. Ignore this function key.