Rockwell Automation 2711E-ND1 PanelBuilder 1400E Reference Manual - Manual (Page 35)

24 Control Selectors
Publication 2711E-820 – January 1998
When the application is downloaded, the Set Bit Cursor Point at
the top left corner of the screen is selected as the default and its
control is set to 1. If the right arrow key is pressed, its control is
set to 0 and the second Set Bit Cursor Point in the same row is
set to 1.
Defining the Set Bit Cursor Point Character and Display Field
The Set Bit Cursor Point object consists of a cursor point character
and a display field. By default the Set Bit Cursor Point object uses a
small arrow as the cursor character.
Note: You can change the attributes of the cursor as you would any
other text character. For example, you could increase the size of the
arrow by selecting another font from the Format menu. See Chapter
9, Creating Objects, in the PanelBuilder 1400e Configuration
Software for Windows User Manual.
To define the Set Bit Cursor Point character:
1. Create the Set Bit Cursor Point object.
2. Choose Text from the Objects menu, or from the toolbar.
3. Position the I-beam to the immediate left of the arrow on the Set
Bit Cursor Point. Use the DELETE key to delete the arrow.
"