Rockwell Automation 2711E-ND1 PanelBuilder 1400E Reference Manual - Manual (Page 136)

131 Scrolling Lists
Publication 2711E-820 – January 1998
Station Status
A Multistate Indicator Object List displays the status of each of the
five visible stations. The following table shows the eight different
states that are possible for each station, and the PLC value.
State Message PLC Value
0 0
1 Stand-by 1
2 On 2
3 Complete 3
4 Bypassed 4
5 Manual On 5
6 Manual Off 6
7 Alarm 7
Option Command
A Multistate Indicator Object List displays command state text for
each of the five currently visible stations.
State Message PLC Value
0 0
1 Select 1
2 Bypass 2
3 Manual On 3
4 Manual Off 4
In this example you can use a momentary button identified as
TOGGLE COMMAND to toggle and display between “Select” and
“Bypass” for the station currently selected by the cursor. Another
momentary button, labeled SET COMMAND, activates the toggled
command.
You can also modify the command for the station currently selected
by pressing the standard momentary buttons “Manual On” or
“Manual Off”. The PLC uses the Cursor Indicator Address to change
the selected station’s command.