Rockwell Automation 1785-Lx0C15 ControlNet PLC-5 Programmable Controllers User Manual - Manual (Page 36)

1785-UM022C-EN-P - February 2008
1-24 Installing Your ControlNet PLC-5 Processor
The following ControlNet cable system components are available
from the Rockwell Automation:
Important: Install all wiring for your ControlNet system in
accordance with the regulations contained in the
National Electric Code (or applicable country codes),
state codes, and applicable municipal codes.
Item
1 Cat. No.
ControlNet Coax Tool Kit 1786-CTK
Coax Tap Kit Right-angle T-tap 1786-TPR
Straight T-tap 1786-TPS
Right-angle Y-tap 1786-TPYR
Straight Y-tap 1786-TPYS
Repeaters Repeater adapter 1786-RPA
Copper 1786-RPCD
Fiber -short 1786-RPFS
Fiber - medium 1786-RPFM
Fiber ring - long 2
1786-RPFRL
Fiber ring - extra long 2 1786-RPFRXL
Dummy load 1786-TCAP
Fiberoptic Repeaters Low-voltage dc 1786-RPA
RG-6 Quad Shield Cable Standard-PVC CM-CL2 1786-RG6
ControlNet Network Access Cable—3.05 m (10 ft) 1786-CP
PC Card Cable for 1784-PCC 1784-PCC1
BNC Connectors Barrel (plug to plug) 1786-BNCP
BNC/RG-6 plug 1786-BNC
Bullet (jack to jack) 1786-BNCJ
Isolated-bulkhead (jack to
jack) 1786-BNCJI
Terminators (BNC-75 Ω) 1786-XT
1 For a complete list of ControlNet cable system components that are available from
Rockwell Automation and other sources, see the ControlNet Cable System
Component List, publication AG-2.2.
2 Planned availability - March 2002.