Rockwell Automation 57RF RFID ICODE Handheld Interface User Manual - Manual (Page 90)

90 Rockwell Automation Publication 57RF-UM001A-EN-P - September 2011
Chapter 7
the UID in the Tag UID box to erase data from a specific tag. Set the Tag UID
box to 0 to erase any tag. The status bar will say “Erasing” while the operation is
being performed.
Clear Tag History
Navigate to Data > Clear Tag History to clear all tags in read/write history. Push
Yes
on the confirmation dialogue to proceed. Push No to cancel. The tag history
counter will be reset to “1 of 0”, and the data grid will be completely cleared. Tag
history can also be cleared by exiting the program.
ASCII Table
To enter special characters in ASCII mode, navigate to Data>ASCII. Select the
character from the pop-up ASCII table or push the ‘X’ to return to the main
screen.
Tag Properties
IMPORTANT Erase will not affect the data displayed on the screen.