Rockwell Automation 57RF RFID ICODE Handheld Interface User Manual - Manual (Page 15)

Rockwell Automation Publication 57RF-UM001A-EN-P - September 2011 15
Chapter 2
10. Tap the radio button next to Screen.
Figure 12 - Application Screen Shot 4
11. Tap OK. The handheld will beep, and Rockwell will be written to the tag
in cells 0…7.
12. To check that the write was successful, manually clear the screen by tapping
in cells 0…7 and pressing Backspace on the keypad.
13. Perform a single read (See Reading an RFID Tag on page 13 ). The data
grid will display Rockwell in cells 0…7.