Rockwell Automation 57RF RFID ICODE Handheld Interface User Manual - Manual (Page 60)

60 Rockwell Automation Publication 57RF-UM001A-EN-P - September 2011
Chapter 6
6. After making your selection, click OK to save your changes and exit the
BCC.
Configuring Bluetooth Services
You can enable and configure the following Bluetooth services on the unit:
• File Transfer Service
• Push Service
• Generic Serial Service
Configuring File Transfer Service
The File transfer service enables a remote device to connect to the unit and
perform file transfers via FTP.
To set up the File Transfer service:
1. Double-click the Bluetooth icon in the System Tray. The Bluetooth
Control Center (BCC) dialog box opens.
2. Select the Services tab.
3. If you do not require connected users to enter a username and password, to
perform file transfers, then check Enable File transfer service.
To require users enter a username and password to perform file transfers,
check Authentication and then check Enable File transfer service.
4. To configure the shared folder or create users, click the Settings link that
appears next to the Enable File transfer service box. The FTP Server dialog
box opens.