Rockwell Automation 57RF RFID ICODE Handheld Interface User Manual - Manual (Page 54)

54 Rockwell Automation Publication 57RF-UM001A-EN-P - September 2011
Chapter 6
To connect to your POP3 or IMAP4 mail server:
1. Select Start>Programs>Inbox>Services>Options. The Options dialog
box opens.
2. Select the Services tab and click Add. The Service Name dialog box opens.
3. From the Service type list, select POP3 Mail or IMAP4 Mail, enter a
unique name for the service (you cannot change this name once entered)
and click OK. The Mail Service Setup wizard appears.
4. In the Required panel:
• Select the name of the connection you created to connect to the mail
server. If you are receiving e-mail through a network (Ethernet)
connection, select Network Connection.
If you want the Inbox to use your current connection, select None.
If you have not created a connection, select Create New Connection,
double-click the Make New Connection icon, and follow the
instructions in the wizard. When finished, select Inbox in the taskbar
and continue setting up the Inbox.
• Enter the POP3 Host or Server (IMAP4) name of the mail server you
use to receive and send messages.