beautypg.com

Rockwell Automation 57RF RFID ICODE Handheld Interface User Manual User Manual

Page 44

background image

44

Rockwell Automation Publication 57RF-UM001A-EN-P - September 2011

Chapter 6

3.

On the ActiveSync menu bar, select Connection Settings from the File
menu. The Connection Settings dialog box opens.

4.

If using the serial interface cable, check the Allow connections to one of
the following

box, and assign the number of the available COM port

(typically COM1). If using the USB cable, check the Allow USB
connections

box.

5.

Click OK to exit.

6.

On the ActiveSync menu bar, select Get Connected from the File menu.
ActiveSync will then start the Get Connected wizard.