Rockwell Automation 57RF RFID ICODE Handheld Interface User Manual - Manual (Page 55)

Rockwell Automation Publication 57RF-UM001A-EN-P - September 2011 55
Chapter 6
• Enter the User ID (user name or mailbox ID) assigned to you.
• Enter the Password you will use to access this mail account. If you do
not want a prompt to enter the password each time you connect, select
Save password
.
5. In the Optional panel:
• If connecting to a network that uses Windows
®
NT domain security,
enter the Windows
®
NT domain name .
• If your mail service uses a separate server for SMTP, enter the SMTP
Host name . For POP3 Mail service with an ISP, the ISP must use an
SMTP mail gateway.
• Enter your return e-mail address.
6. Click Next. The General Preferences dialog box opens.
7. Choose any of the settings, all of which are optional, then click Next. The
Inbox Preferences dialog box opens.
8. Choose any of the settings as needed, then click Finish. The Mail Service
Setup wizard closes and the Options dialog box reappears.
Note: Receiving entire messages consumes storage memory.
9. Close the Options dialog box to return to the Inbox.