Rockwell Automation 57RF RFID ICODE Handheld Interface User Manual - Manual (Page 40)

40 Rockwell Automation Publication 57RF-UM001A-EN-P - September 2011
Chapter 5
Changing System Settings Any time you make changes through the Control Panel (such changing the time
zone), you must also update the persistent registry to store the changes in internal
compact flash memory to make the changes permanent.
For example, to change the time zone and save the changes to the registry:
1. Select Start>Settings>Control Panel.
Owner Use this function to enter the owner name, address, phone
numbers, notes, and network ID.
Password Use this function to enable password protection and set a
password.
PC Connection Use this function to enable direct connection to a desktop
computer.
Power Use this function to:
• Check battery power
• Set device to turn off when idle
• Set up power schemes
• Check the power levels of your system devices
Regional Settings Use this function to change the appearance of region specific
information, such as date, time, and currency.
Remove Programs This function enables you to remove programs installed in RAM.
Stylus Use this function to recalibrate the touch screen and adjust the
stylus double-click rate.
System Use this function to view system information, change the RAM
(Program/Storage memory) division, change the device name,
and change the device description.
Icon Function Description
IMPORTANT Click the icon, not the name.