Rockwell Automation 57RF RFID ICODE Handheld Interface User Manual - Manual (Page 39)

Rockwell Automation Publication 57RF-UM001A-EN-P - September 2011 39
Chapter
5
Configuration
Control Panel The table below lists the available control panel functions on the RFID ICODE
handheld interface.
Icon Function Description
Aux CF Card This function enables you to enable/disable power to CF cards
installed in the internal CF Card slot, which is not user
accessible.
Aux Switch For units with a second COM that supplies 5V DC output, use
this function to set the default power state (on or off), and test
the connected devices.
Backlight Use this function to adjust the backlight setting for the
following conditions: Line Active, Line Active Inactive, Battery
Active, and Battery Inactive.
Battery Select Select one of the following options to calibrate the power
status icons for proper use: NIMH, AC Line, or Alkaline.
Beep Select Use this function to change the frequency, volume, and duration
properties of the beep.
Certificates Use this function to import, view, or remove certificates, which
protect your personal information on the Internet, and protect
your computer from unsafe software.
CPU Speed Use this function to determine the current CPU and cold boot-up
speed. Allowable selections are 312 MHz and 624 MHz.
Date/Time Use this function to adjust the date, time, and time zone.
Dialing Use this function to adjust the dialing location settings and
dialing patterns when using a modem.
Display Use this function to adjust the backlight timeout, change the
background image, or change the desktop color scheme.
Display Rotation Use this function to rotate the screen 180° (upside down).
Hot Keys Use this function to assign functionality to the unit’s eight
programmable keys.
Internet Options Use this function to set up connections, security settings, and
internet related functions.
Keyboard Use this function to change the repeat delay and repeat rate.
Network and
Dial-up Connections Use this function to change network adapter settings and/or set
up identification for remote networks.