Rockwell Automation 57RF RFID ICODE Handheld Interface User Manual - Manual (Page 79)

Rockwell Automation Publication 57RF-UM001A-EN-P - September 2011 79
Chapter 7
The Write button will turn blue, and the status bar will say “Writing.” After the
write operation is complete, the Write button will return to its original grey color.
Single Tag Write from File
To write to a tag from a file, ensure that the file is a text (.txt) file in the following
tab-delimited format, with a new line denoting a new tag:
[CR] [LF]
*The individual data bytes in the data field are separated from one another by a tab, except in ASCII mode.
Deselect the Continuous box for Single Write. Push the Write button. A
confirmation dialogue will pop up. Selecting Cancel or the X button will cancel
the write operation. To change or verify the file from which data will be written,
push Settings.
This will bring up the Write Settings tab and allow users to select a file for write
from file. Push the “…” button to open the File Browser window and select a text
file. Push Cancel to close the settings window without making changes. Push OK
to save changes, close the window, and return to the Write from… pop-up
window. See
Write Settings on page 88 for more information.