Rockwell Automation 57RF RFID ICODE Handheld Interface User Manual - Manual (Page 82)

82 Rockwell Automation Publication 57RF-UM001A-EN-P - September 2011
Chapter 7
The Write button will turn blue, and the status bar will say “Writing”. The device
will continuously write the specified data to tags until the blue Write button is
pushed. After the continuous write operation is complete, the Write button will
return to its original grey color.
Continuous Tag Write from File
To write to a tag from a file, ensure that the file is a text (.txt) file in the following
tab-delimited format, with a new line denoting a new tag:
[CR] [LF]
*The individual data bytes in the data field are separated from one another by a tab, except in ASCII mode.
Check the Continuous box for Continuous Write. Push the Write button. A
confirmation dialogue will pop up. Selecting Cancel or the X button will cancel
the write operation. To change or verify the file from which data will be written,
push Settings.
IMPORTANT During a Continuous Write from Screen operation, the data grid will be
locked to prevent accidental editing. To edit data fields, the user must
first exit Continuous Write mode.