Rockwell Automation 57RF RFID ICODE Handheld Interface User Manual - Manual (Page 84)

84 Rockwell Automation Publication 57RF-UM001A-EN-P - September 2011
Chapter 7
Example:
A 2/6/2011 13:55:39 E004010019DC4EA6 SLI 128 8 4 Rock
D 2/6/2011 13:55:46 E004010031A5BD1B SLI 128 8 4 119 101 108 108
H 2/6/2011 13:55:53 E00401003F47ABFE SLI 128 8 4 61 75 74 6f
B 2/6/2011 13:56:06 E00401003F47A767 SLI 128 8 4 01101101 01100001
01110100 01101001
Multiple Lines, Unspecified Tag UID in Top Line Only
In this format, the Tag UID is specified for each tag in the file, except for the top
line, which has an unspecified Tag UID (for example, “0”). When a tag is
scanned, the software searches for its Tag UID in the file and writes the
corresponding data to the tag. If the user scans a tag for which the Tag UID does
not appear in the file, the data corresponding with the top line (unspecified Tag
UID) will be written to the tag. The status bar will display “Writing” while the
data is being written to the tag and “Ready” when it is waiting for the next tag.
Example:
A 2/6/2011 13:55:39 0 SLI 128 8 4 Rock
D 2/6/2011 13:55:46 E004010031A5BD1B SLI 128 8 4 119 101 108 108
H 2/6/2011 13:55:53 E00401003F47ABFE SLI 128 8 4 61 75 74 6f
B 2/6/2011 13:56:06 E00401003F47A767 SLI 128 8 4 01101101 01100001
01110100 01101001
Multiple Lines, No Specified Tag UIDs
In this format, all Tag UIDs in the file are unspecified (for example, “0”). When
the first tag is scanned, the data in the first line will be written to the tag. When
the handheld detects a tag with a different Tag UID, the data in the second line
will be written to the second tag. For each line, the handheld will wait for a tag
with a different Tag UID than the tag that was previously written to. The status
bar will display “Writing” while the data is being written to the tag and “Ready”
when it is waiting for the next tag. After writing all lines in the file, the device will
exit Continuous Write mode.
Example:
A 2/6/2011 13:55:39 0 SLI 128 8 4 Rock
D 2/6/2011 13:55:46 0 SLI 128 8 4 119 101 108 108
H 2/6/2011 13:55:53 0 SLI 128 8 4 61 75 74 6f
B 2/6/2011 13:56:06 0 SLI 128 8 4 01101101 01100001 01110100 01101001
Single Line, Unspecified Tag UID
In this format, the file contains only one line, and the Tag UID is unspecified (for
example, “0”). The data from the file is written to each tag that is scanned during
the Continuous Write operation.