Rockwell Automation 57RF RFID ICODE Handheld Interface User Manual - Manual (Page 59)

Rockwell Automation Publication 57RF-UM001A-EN-P - September 2011 59
Chapter 6
2. Click the OFF button. After the unit successfully disables the transmitter,
it will update the Bluetooth status to OFF, and it will no longer display the
device address in the BCC dialog box. The status is Bluetooth disabled.
3. Click OK to save your changes and exit the BCC.
Making the Unit Accessible
To configure how the unit interacts with other Bluetooth devices:
1. Double-click the Bluetooth icon in the System Tray. The Bluetooth
Control Center (BCC) dialog box opens.
2. Select the Accessibility tab.
3. Enter a name that uniquely identifies this unit to other Bluetooth devices.
The default value is “JETTXL/EYE.”
4. Check or clear the Discoverable Mode box to make the unit discoverable
or not discoverable by other Bluetooth devices. To be found by another
Bluetooth device in a search, a unit must be discoverable. The default value
is discoverable.
5. Check or clear the Connectable Mode box to allow or prevent other
Bluetooth devices from connecting to the unit. The default value is
connectable.