JUMO 902931 Wtrans Receiver with Wireless Data Transmission Operating Manual - Manual (Page 81)

81
11 Setup program
11.1 General information about the setup program
The configuration data of the receiver and transmitters can be archived in a single file on data
storage media and can be printed and kept on record.
You can use the setup program to overwrite changed parameters with the factory default set-
tings at any time.
The receiver and the PC are connected via a PC interface (USB/TTL or TTL/RS232).
Figure 35: Setup program
The setup program enables convenient and clearly structured adjustment of the numerous de-
vice parameters. If settings have been made once, they can be saved on data storage media
as files and transferred to other devices as identical settings.
If there is an online connection to the device, the bottom section of the screen – the "diagnosis
window" – shows actual values and further informative values for all channels in parallel.
 Chapter 5.2 "Connection diagram", page 32
TIP!
For configuration, the receiver must be connected to the voltage supply.