9 term definition – JUMO 902931 Wtrans Receiver with Wireless Data Transmission Operating Manual User Manual

Page 71

Text mode
Original mode

9 Term definition

Collective alarms
A relay is switched when any alarm is activated.
Collective alarms can be:
•

OR link of all individual alarms

•

Wireless timeout, channel 1 to 16

•

Analog alarms 1, channel 1 to 16

•

Analog alarms 2, channel 1 to 16

•

Low battery, channel 1 to 16

•

Save errors detected with power ON



Chapter 8.2 "Parameter level (PA)", page 55

Remote control values BOOLEAN 1 to 4
A relay is switched when the remote control value is set to ON.
Remote control values are controlled via an interface.
Fixed value ON/OFF
Depending on the selection, a relay is activated or deactivated.