JUMO 902931 Wtrans Receiver with Wireless Data Transmission Operating Manual - Manual (Page 65)

65
9 Term definition
9.1 General parameters
9.1.1 Device information
Software version
The software version indicates the current device software (firmware) version. This information
may be required for servicing.
Hardware version
The hardware version provides information about the installed receiver hardware (e.g. the radio
frequency).
15 = 868.4 MHz radio frequency, 4 analog outputs
14 = 915 MHz radio frequency, 4 analog outputs
13 = 868.4 MHz radio frequency, 2 analog outputs and 2 relay outputs
12 = 915 MHz radio frequency, 2 analog outputs and 2 relay outputs
Error (system error bit)
Error (system error bit) indicates:
For bit 0 (0x01), the receiver has initialized the configuration data with the factory settings.
Please check the settings and reconfigure if necessary.
For bit 1 (0x02), the receiver has initialized the calibration data with the factory settings.
Recalibrate the receiver.
Wtrans transmitter
Type T01.G1
Type T02.G1
Type T03.G1 Ex
Food insertion RTD temperature probe
(for Wtrans receivers as of software version 01.01)
Ambient temperature for the case: -30 to +85 °C
Ambient temperature for the case: -25 to +125 °C
Ambient temperature for the case: -30 to +85 °C Detailed informa-
tion can be found
in data sheet
902930
Wtrans transmitter
Type T01.G1
Type T02.G1
Type T03.G1 Ex
Mineral-insulated RTD temperature probe with flexible
protection tube
(for Wtrans receivers as of software version 01.01)
Ambient temperature for the case: -30 to +85 °C
Ambient temperature for the case: -25 to +125 °C
Ambient temperature for the case: -30 to +85 °C 902930
Wtrans transmitter
Type T01.G2
Type T02.G2
With M12 × 1 plug connection for RTD temperature
probes
(for Wtrans receivers as of software version 01.01)
Ambient temperature for the case: -30 to +85 °C
Ambient temperature for the case: -25 to +125 °C 902930
Wtrans transmitter
Type T03.G2 Ex
With M12 × 1 plug connection and RTD temperature
probe with PTFE connecting cable
(for Wtrans receivers as of software version 01.01)
Ambient temperature for the case: -30 to +85 °C 902930
Wtrans B Programmable head transmitter with wireless data trans-
mission
(for Wtrans receivers as of software version 03.01) 707060
Wtrans p Pressure transmitter with wireless data transmission
(for Wtrans receivers as of software version 04.01) 402060