JUMO 902931 Wtrans Receiver with Wireless Data Transmission Operating Manual - Manual (Page 53)

53
8 Configuring the receiver
All other transmitter IDs can be assigned directly to the desired channel in the manner ex-
plained above.
8 Hold the key for > 2 s to link the transmitter ID to channel 2 (see Figure 26).
The entered transmitter ID stops flashing.
The "Link" information appears for 0.25 s in the bottom line of the display.
9 To return to the normal display, hold the key for > 2 s or use the 40 s key timeout.
The measured value of the transmitter linked to channel 1 is displayed in the top line of the
display. The channel designation 1 and the unit re-appear in the bottom line.
Step Action