HYDAC CS 1000 - Manual (Page 9)

ContaminationSensor CS1000 General safety guidelines
HYDAC Filtertechnik GmbH en Page 9 / 100
BeWa CS1000 3247149n en 2009-02-04.doc 2009-02-04
General safety guidelines
These operating instructions contain the most important notes for operating the CS
safely.
Obligations and liability
The basic prerequisite for the safe handling and trouble-free operation of the CS is
knowledge of the basic safety guidelines and regulations.
These operating instructions in general, and the safety precautions in particular, are
to be observed by all those who work with the CS.
In addition to this, all local accident prevention instructions and regulations must be
observed.
The safety guidelines listed here are restricted to use of the CS.
The CS has been designed and constructed in accordance with the current state of
the art and recognized safety regulations. Nonetheless, its use may pose risks to life
and limb of the user or to third parties or damage to the unit or other equipment and
property.
The CS is only to be used as follows:
• Solely for its intended use
• Only when in safe, perfect condition
• Faults or malfunctions which may affect safety adversely must be remedied
immediately.
Our General Terms and Conditions apply. They are provided to the owner upon
conclusion of purchase of the unit at the latest. Any and all warranty and liability
claims for personal injuries and damage to property shall be excluded in the event
they are attributable to one or more of the following causes:
• improper use of the CS or use deviating from its intended use
• Improper assembly/installation, start up, operation and maintenance of the CS
• modifications to the CS made by the user or purchaser
• improper monitoring of unit components subject to wear and tear
• improperly performed repair work
Explanation of symbols and warnings
The following designations and symbols are used for hazards and warnings in this
manual: