HYDAC CS 1000 - Manual (Page 86)

ContaminationSensor CS1000 Taking the CS1000 out of operation
HYDAC Filtertechnik GmbH en Page 86 / 100
BeWa CS1000 3247149n en 2009-02-04.doc 2009-02-04
Taking the CS1000 out of operation
Decommission according to the following steps:
1. Pull electric plug from CS.
2. Depressurize the hydraulic system.
3. Remove the connected hoses/piping from the CS.
4. The CS can now be removed.
Disposing of CS1000
The packing material is to be disposed of as specified by law or national regulations
or be reused.
When decommissioning and/or disposing of the CS, observe all local guidelines and
regulations pertaining to occupational safety and environmental protection. This
applies in particular to the oil in the unit, components covered with oil and electronic
components.
After disassembling the unit and separating the various materials, they can be
reused or disposed of properly in accordance with local regulations.