HYDAC CS 1000 - Manual (Page 19)

ContaminationSensor CS1000 CS1000 Features
HYDAC Filtertechnik GmbH en Page 19 / 100
BeWa CS1000 3247149n en 2009-02-04.doc 2009-02-04
Fastening / mounting the CS1000
When attaching the CS make sure that the direction of flow is from bottom to top.
Use the one (lower) port as the INLET and the other (upper) port as the OUTLET.
When selecting the installation site, take ambient factors like the temperature, dust,
water, etc. into account.
The CS is designed for IP67 according to DIN 40050 / EN 60529 / IEC 529 / VDE
0470.
Depending on the design, the CS1000 can be attached as follows:
1. Wall mounting: using 2 cylindrical screws with
an M8 hexagonal socket, minimum length: 40
mm, according to ISO4762.
2. Console mounting: using 4 cylindrical screws
with an M6 hexagonal socket according to
ISO4762.
A B
100
60
12/16
4xM6
15
20
Bottom view
All dimensions in mm.