HYDAC CS 1000 - Manual (Page 36)

ContaminationSensor CS1000 Operating the CS1000 per keyboard (Only CS1x2x)
HYDAC Filtertechnik GmbH en Page 36 / 100
BeWa CS1000 3247149n en 2009-02-04.doc 2009-02-04
Measuring Menu
The Measuring menu allows you to change settings during operation.
Selection To do
Start Measuring menu
Press
o.k.
button.
Exit without saving
Scroll to
CANCEL
and press
o.k.
Or automatically after 30 s without any action
Exit and save changes
Scroll to
SAVE
and press
o.k.
Measuring menu: Description
DSPLAY Select display
SWtOUT Set switching output
ANaOUT Select measurement category
for analog output
CANCEL Discard changes and exit
SAVE Save changes and exit
Display — Select display after switching on the sensor
DSPLAY
Select display + Description
ISO 3-digit ISO code
SAE A SAE class A
SAE B SAE class B
SAE C SAE class C
SAE D SAE class D
SAeMAX SAE A-D
FLOW Flow rate [in ml/min]
ANaOUT Analog output [in mA]
DRIVE LED current [in %]
TEMP C Fluid temperature in °C
(Celsius)
TEMP F Fluid temperature in °F
(Fahrenheit)