HYDAC CS 1000 - Manual (Page 34)

ContaminationSensor CS1000 Operating the CS1000 per keyboard (Only CS1x2x)
HYDAC Filtertechnik GmbH en Page 34 / 100
BeWa CS1000 3247149n en 2009-02-04.doc 2009-02-04
Activating/deactivating key lock
The keypad can be locked to prevent entries.
To enable or disable the key lock, press both keys simultaneously:
Buttons Display (1 sec) Description
+
LOCK
Key lock is enabled
+
UNLOCK
Key lock is disabled
The display returns to the default display after 1 second.
Modes and menus
The sensor features two operating modes, with corresponding menus:
Menu Mode Description
Power Up menu Power Up mode For basic settings
Measuring menu Measure mode
Starts automatically after powering
up
Continuous display of measured
values
Power Up menu
The basic settings are made in the Power Up menu.
Selection To do
Start Power Up menu
Press any button and hold it down while
switching on the supply voltage
Exit the Power Up menu without
saving
Scroll to
CANCEL
and press
o.k.
Or automatically after 30 s without any action
Exit Power Up menu
and save
Scroll to
SAVE
and press
o.k.
Power Up Menu: Description
MODE Select measuring mode
mTIME Set measuring period
pPRTCT Set time for pump protection
ADRESS Set bus address