HYDAC CS 1000 - Manual (Page 18)

ContaminationSensor CS1000 CS1000 Features
HYDAC Filtertechnik GmbH en Page 18 / 100
BeWa CS1000 3247149n en 2009-02-04.doc 2009-02-04
Hydraulic connection types
The direction of flow through the CS has to be from bottom to top. Use one port, A
<-> B or D<->C as the INLET and the other port as the OUTLET.
Pipe or hose connection (Type CS1xxx-x-x-x-x- 0 /-xxx )
Hydraulic connection is done via ports A and B. Connection
thread: G1/4 according to ISO 228
The direction of flow has to be from bottom (A) to top (B).
A
B
Flange connection type (Type CS1xxx-x-x-x-x- 1 /-xxx )
Hydraulic connection is done via ports C and D. Two O-rings are used to form a seal
between the CS and a flange, connecting plate or manifold mount. Four M6 threads
are prepared for fixing the CS1000. Ports A and B are sealed off with screw plugs
[1]. Sealing with the manifold block or mounting plate is done via two O-rings [2]
(4.48 x 1.78 FPM, see Chapter "Spare Parts + Accessories").
[1] [2]
[1]
C
A
B
D
C D
25
15
2
0
100
40
60
12/16
4xM6 [2]
View from below.
All dimensions in mm.