CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 96)

80
[Hotline Alert x] The event can be set to trigger up to 3 units of telephones and pagers. A text
message may be sent to the pager.
Enter the telephone number
Enter the text message
Figure 1-62
1. In the Dial HotLine drop-down list, type the telephone or pager number.
2. Select Activate.
3. Select Attach Text Message and type the text messages to be sent to a pager.
4. The system allows you to send a custom sound file to the telephone. For this operation a
microphone must be installed on the computer of GV-System. To record a sound file, follow these
steps:
a. Click the Rec button. This dialog box appears.
Figure 1-63
b. Click the Record button to start recording. Speak the message script clearly to the
microphone. Click Stop button when it is done.
c. Click the Play button to listen to the recording. To save this sound file, click File, select Save
as, and then click the Change button. This Sound Selection dialog box appears.
Figure 1-64