CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System User Manual

Page 445

Remote Viewing

429

Playing Back the Recordings

To play back the recordings, follow these steps:

1. Enable these two functions on the WebCam Server.

A. Enable

the

Run ViewLog Server option on the General tab. For details, see General

Settings in WebCam Server Settings earlier in this chapter.

B. Enable

the

Mobile function on the Mobile tab, and keep the RPB port to be 5511 or modify it

if necessary. For details, see Mobile Settings in WebCam Server Settings earlier in this

chapter.

2. Execute

GV-GView V2 on your PDA.

3. Click the button located at the lower left corner (see Figure 8-54). The login screen appears.

Figure 8-56

4. Enter the IP address of the GV-System, port value (default value is 5511), a username and a

password. Then click OK to connect.

5. Select the desired recording on the event list for playback.

Note:

1. The remote playback (RPB) function is only supported if the video was recorded with a resolution

of CIF or lower.

The remote playback (RPB) function does not support the playback of video files recorded on the

GV IP devices.