CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 549)

Useful Utilities
533
11
11.6.6 Connecting GV-System to the Server
To configure the GV-System in order to access the Authentication Server remotely through a network
connection, follow these steps:
1. Click
the Configure button (No. 14, Figure 1-2), point to General Setting, select Password
Setup, and then select Remote Authentication Setup. This dialog box appears.
Figure 11-29
„ Use Remote Authenticator: Enable the connection with the Authentication Server.
„ Allow Local supervisor to stop use remote authentic system: Allows the local supervisor
to stop the Authentication application when the connection with the Authentication Server fails.
Note if the option is disabled and the connection with the Authentication Server fails, the local
supervisor will not be able to log into the GV-System and the dialog box won’t be accessible
until connection resumes.
„ Allow user to use local account login remote application: Allows the local users to access
other remote applications with their previous password and ID settings when the connection
with the Authentication Server fails.