CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 412)

396
See Remote ViewLog later in this chapter.
9 Configure
Accesses system settings of the Multi View.
See System Configuration later in this chapter.
10 Edit Host
Adds, deletes or modifies a host.
See Adding a Host later in this chapter.
11 Camera Status
Displays the camera status of the connected GV-System.
See Camera Status later in this chapter.
12 Host Information
Displays the general information of the connected GV-System.
See Host Information later in this chapter.
13 Zoom in and out Zooms in or out the selected channel.
14 Add/Remove Frame
Adds or deletes the frames for video polling. Click the Add or
Remove Frame button and then click the desired channel to add to
or remove from the video polling.
15 Next Goes to the next page of Screen Division buttons.
16 Multicast
Accesses the Multicast function.
See Multicast and Audio Broadcast later in this chapter.
17 Full Screen
Switches to a full screen view. The maximum video resolution set on
the GV-System will be applied. See Video Settings in WebCam
Server Settings earlier in this chapter.
18 Video Polling
Rotates through the selected channels.
See Camera Polling later in this chapter.
19 Screen Division Sets screen divisions to 4, 6, 8, 9, 10, 13, 16 or 32.
20 Exit/Minimize Closes or minimizes the Multi View window.
21 Speaker Enables live audio from a remote GV-System.
22 Microphone Enables speaking to a remote GV-System.
23 Play Establishes the connection to a GV-System.
24 Stop Terminates the connection to a GV-System.
25 Save
Saves live video.
See Video Recording later in this chapter.
26 Quality
Adjusts video quality with these options: Auto Scale (using the
original resolution and quality of video sources), Geo H264 and Geo
MPEG4.
For hardware-compressed and megapixel quality, see
Hardware-Compressed and Megapixel Stream later in this chapter.
27 Snapshot Takes a snapshot of the selected channel.
28 Save Camera to Multiple Host
Saves the selected cameras and creates a Multiple Host.
See Combining Multiple Hosts into a Single Host later in this chapter.