CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 511)

Short Message Service
495
10
„ Server IP: Enter the IP address of the SMS Server.
„ Server Port: Enter the server port of the SMS Server, or keep it as default.
„ Login ID & Password: Enter a valid ID and password registered in the SMS Server (Figure
10-7).
„ Local: If the GSM/GPRS modem is installed at the same server with the GV-System, select
this item.
„ Remote: If the GSM/GPRS modem is installed at a separate server, select this item.
6. Click OK to apply above settings.
7. Click the Test Account button (Figure 10-12). If the connection of both devices is established, the
message will appear: Login SMS Server OK! If the connection fails, the message will appear:
Connect to SMS Server Fail.