CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 513)

Short Message Service
497
10
10.6.3 Setting Alert Notification
To specify the types of events to receive alert notification:
1. Click the Configure button (No.14, Figure 1-2), select General Setting, and select System
Configure. The System Configure dialog box (Figure 1-3) appears.
2. Select Send Event Alerts in the Monitor Option section, click the Arrow button and select the
events to send alert notification.
Figure 10-15
3. To send SMS alerts when motion is detected, click the Camera Record Setting tab on the
System Configure dialog box, select Invoke to Send Alerts.
4. Start monitoring. When the specified events or motion is detected, SMS alerts will be sent out
automatically.