CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System User Manual

Page 126

Text mode
Original mode

110

1. Click

the

Configure button (No. 14, Figure 1-2), select Tools, select DirectDraw Configuration

and select Use Colorful Mode. Then restart the Main System.

2. Click

the

Configure button, select A/V Setting, clear the selection of DSP Overlay, and restart

the Main System for the colorful mode to take effect.

Note: The Colorful Mode can be applied to any connected channels of IP devices directly by
selecting Use Colorful Mode and then restarting the Main System.