Konica Minolta Magicolor 3300DN - Manual (Page 99)

Clearing Media Jams 91
2
Pull out the jammed media.
Even up the front edges of the
media currently in the tray.
3
Remove any remaining media from
the printer.
4
Open the front cover (button A
, ).
5
Check for any media scraps inside
the printer.
6
Close the printer’s cover.
7
Reinsert the media in the tray
printing face up.
Attention
Make sure the media doesn’t exceed the media limit mark. Check to
see if the media width guides are correct.
8
Slide the tray(s) back into the
printer.
The media jam display is cleared.
A
2
1